Addressable manual call point DMA05

Main characteristics
CE certified according to CPD
Conform with the standards EN54-11, EN54-17, EN54-18
Key for reset
Separate key for test
No break glass
BA9S Waterproof IP65 version

Power supply specification
Main supply voltage:                                     12V to 28Vdc
Nominal main supply voltage                     24Vdc
Quiescent current                                         0.15 ma
Alarm current:                                               5mA @ 24Vdc
Mechanical characteristics
Unit weight:                                                    170g
Unit dimensions (in mm):                           99 x 98 x 49
Unit row material:                                         ABS
Unit colour:                                                     Red
Protection class:                                             IP33
Climatic characteristics
Operating temperature:                               -10°C to +60°C
Storage temperature:                                   +10°C to +50°C
Operating relative humidity:                      ≤ 93%
Storage relative humidity:                           ≤ 85%

Description

DMA05 manual call points are devices of transmission of an alarm status towards an addressable indicating panel.
This action is carried out by the operator through mechanical pressure on the window located in the front.
Return to the normal status can be done only after local resetting using a special key.
Moreover the addressable version of manual call point integrates on every device a switch providing the function of line
isolator. This function is assured only in association with the HEPHAIS range panels which are equipped with boards
managing the loop/line. The function “Isolator of line” makes possible the isolation of sections in short-circuit (Shortcircuit
between 2 conductors of the connecting cable), located between 2 devices equipped with switch.
Usually, connection is carried out with shielded cable from 0, 6mm² to 1,5mm². Shield must be protected by an insulator
tape in order to avoid any short-circuit.
Call point also exits in waterproof IP65 version BA95S

Additional information