Conventional call point DMCL05

Main characteristics
CE certified according to CPD
Conform with the norm EN54-11
Key for reset
Separate key for test
No break glass
Red colour for Alarm status
Yellow colour for extinguishing command
Blue colour for Extinguishing abort

Power supply specification
Main supply voltage:                                     13V to 30Vdc
Nominal main supply voltage                     20Vdc
Quiescent current                                         0 µA
Alarm current:                                               35mA @ 24Vdc
Mechanical characteristics
Unit weight:                                                    140g
Unit dimensions (in mm):                           99 x 98 x 49
Unit row material:                                         ABS
Unit colour:                                                     Red
Protection class:                                             IP33
Climatic characteristics
Operating temperature:                               -10°C to +60°C
Storage temperature:                                   +10°C to +50°C
Operating relative humidity:                      ≤ 93%
Storage relative humidity:                           ≤ 85%

Description

DMCL05, DMCL05-J and DMCL05-B manual call points are devices of transmission of an alarm status
(normative red colour), extinguishing command (normative yellow colour) and extinguishing abort
(normative blue colour) towards conventional indicating panel. This action is carried out by the operator
through mechanical pressure on the window located in the front. Return to the normal status can be done only
after local resetting using a special key.
Usually, connection is carried out with shielded cable from 0,5mm² to 2,5mm² for conventional systems
following the indications screen printed on the printed circuit. Shield must be protected by an insulator tape in
order to avoid any short-circuit.

Additional information